Fidelity Audio HPA-200
Building on the many strengths of the HPA-100, the ‘200 utilises meatier power supplies and top-of-the-range voltage regulation. The power transformer’s capacity is raised from 15 to 30VA and in place of the more basic voltage regulators we use our own SPower low noise regulation. Other changes include further tuning the power supply decoupling in the buffer stage and using even better quality opamps. These improvements have a profound effect on the musical performance of the HPA-200, unleashing a more dynamic, analogue sound, which is better extended at both extremes of frequency giving the sound a valve like quality.
Just as in the HPA-100 the amp uses high quality audio-grade parts throughout, comes with a 2-year parts and labour warranty and can be customised with your choice of power LED.
Specification - HPA-200
Headphone impedance range: 12 to 600 Ohms
Headphone Jack: 1/4 inch (6.35mm)
Power output: (rms, both channels fully driven) 32 Ohms: >500mW/channel
Distortion: (THD + N @ 1kHz): 0.00003%
Frequency response: (-3dB) 32 Ohms load: 10Hz - 35kHz; 300 Ohms load: 10Hz - 38kHz
Channel balance: 0.5dB approx
Output Stage: 2x High Performance, low distortion high fidelity 250mA audio buffers
Supply voltage: AC 230V +/- 10%
DC voltage: Very Low Noise linear dual power supply +15V & -15V
Size: (approx.) W: 104 x H:56 x D:245 (mm) including controls & feet
Weight: 1.22 Kg (1.73 Kg including packaging)
Please note: Headphone amplifiers are built to order and due to demand can take up to 14 working days before dispatch.
"..Via LP the HPA-200 gave deep, subterranean lows, and a rich tone to the midrange with a fine vocal performance that offered real emotional impact..."
"..Lovely resonant strings, dripping with harmonics, showed the HPA-200's naturally incisive midband at its best..."
"..Treble was crisp and spacious, with loads of atmosphere..."
"..An excellent high end headphone amplifier this..."